GAS | Water | Steam | Fuel | Data Acusation System
Insertion Type Gas Flow Meter
Varibale Line Size (OneMeter For 2-6" Line Size)
Thermal Instruments provides a broad range of reliable, accurate and full-featured flowmeters and flow and level switches to industrial OEMs and end-user customers.

Our thermal flowmeters offer you these advantages:
  1. Direct mass flow measurement in standard units (i.e. SCFM, NM3H, etc.) or mass units (lbs/min, kg/h, etc.)
  2. No pressure or temperature compensation requirements
  3. Exceptionally broad measurement range (100 to 1 turndown typical) including very low velocity flow
    4. No moving parts and negligible pressure drop
  4. Field programmable and calibrated with NIST standards
  5. Available in stainless steel and Hastelloy sensor configurations
  6. Insertion models with retractor options for 1-1/2" and larger pipes
  7. Inline models with flow conditioning from 1/4" to 6"
  8. Approved for hazardous locations
 
Smart, Real Time Flow Measurement
The gas flowmeter and temperature transmitter measures two important process variables with a single instrument and supports a wide range of communication protocols:
  1. RS232
  2. RS422/RS485-Modbus
  3. ProfibusDP
  4. DeviceNet
  5. Ethernet


The Palm PDA interface offers similar functionality and is  ideal  for “walk around” monitoring of process conditions.
 
The flowmeter directly measures mass flow rate of air and gases, and provides isolated 4-20 mA and pulse outputs for flow rate, as well as a 4-20 mA output for process gas temperature. Easy to use View Software lets you:
  1. quickly change meter configuration
  2. view process measurements
  3. collect and analyze process data at your PC orcontrol station
The flowmeter and temperature transmitter is FM and FMc approved for Class I, II, III, Division 2, Groups A, B, C, D, E, F, G, T4A hazardous locations. NEMA 4X and CE approved.